PRODUCTS

CONTACT US

Phone:0534-3420111
Fax::0534-3421567

E-mail:qyzhongxin@163.com
Address::Bohai Economic Development 
Zone, Qingyun, Dezhou, Shandong

COPYRIGHT © 2017 QINGYUN COUNTY CITIC MACHINE TOOL ACCESSORIES CO., LTD 鲁ICP:3029690号-2   POWERED BY WWW.300.CN

NEWS

ABOUT US  

PRODUCTS

TLG Steel Cable Chains

Product name

TLG Steel Cable Chains

Affiliate classification
没有此类产品
Description

The TLGA type drag chains are suitable for installing a large quantity and heavy duty of cables and oil pipes which allow suspending installation ( supporting is not allowed) and is lengthy. The supporting plate can be made according to the user requirements. It is suitable for machine tools and moving machines. Their bent radius ranges from 50-600mm and the chain height is from 35 to 150mm. Users can make a free selection of them.
The TLGA type drag chains has a max. travel range of 32 meters and are suitable for ail kinds of transmissions. It can freely be made longer or shorter. In addition, the bend radius can be changed by changing the pinshaft.
The width of the supporting board is 丨rom 150mm to 600mm. The distance between the holes is 5mm.
The height of the supporting board depends on the max. outside diameter of the cables. When the machine tool is working in the highest speed and if the max. width of the drag chain is longer than 300mm with the chain length longer than 4m, one size larger than normal should be selected just out of considration of safety.
The bend radius should be selected according to the max. diameter of a cable and shoulod be 10 times of the diameter of the cable used. The bend radius can be selected as 50-600mm according to the given table. Small radius should be selected for those ones with small travel range.
Drag chain length= 1/2 travel range + 4 bend radius, this is only used for the fixed connection which is located at the middle point of the travel range.
The fexation of the drag chains can be done according to the location of the machine tools. The angle steel can be put in the outer or the inner, in other words, in the inner side of the chains or in the oute side. In common cases, it is in the inner side of the chains and face towards outside.

Main parameters & demensions for TLG type steel drag chains

 


Bending radius (mm)

 


Inside
height

c

d

e

f

9

h

k

When non-support roller is allowed

Weight

Type

Pitch

 

 

 

 

 

 

 

(m> Length

(kg/m) Load

(100mm)

TLG75

100/150/200/250/300

75

31

50

8

4

30

12

9

12

3/2/2

20/30/30

4.90/4.80/5.50

TLG 100

150/200/250/300/400

100

49

75

10

4

50

17

11

17

4/3/3

25/40/40

9.10/9.10/10.00

TLG 125

200/250/300/400/500

125

68

100

14

4

70

22

13

22

6/4/4

30/50/50

18.10/18.10/19.30

TLG 175

250/300/400/500/600

175

118

150

14

8

115

26

13

26

10/8

10/30

25.00

 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article